Praktik Bagno
Save space in the bathroom area is important, especially to make the best of the space under the washbasin.
Praktik Bagno is the range of traps for washbasins and bidets characterised by a decidedly small encumbrance, only 45 mm between the centre distance of the outlet pipe and the lower limit of the trap body (art. 2322.241.6).
Praktik Bagno is easily adaptable in installation thanks to the eccentric fitting that facilitates connection to the wall drainage when this is offset respecting the outlet trap pipe.
Praktik Bagno is also supplied with a reduction for connection to 1″ waste which, in addition to the double outlet diameter 32 and 40 mm, makes it a universal trap that can be used in any context.
Main features
Integrated inlet thread
the thread connection to the waste is integrated with the rest of the inlet pipe H. 200 mm; this makes installation easier and quicker as the entire inlet pipe can be used to fasten the under-sink siphon instead of tightening only the ring nut, which is usually positioned in a difficult-to-access position
Reduction 1″¼ – 1″
thanks to the 1″¼ – 1″ reduction included (including gasket), the trap is suitable for wastes (both 1″ and 1″¼)
Double outlet diameter ø32/40
the 250 mm outlet pipe has a diameter of 32 mm while the eccentric fitting, which facilitates wall connection and further reduces the size of the trap, has a diameter of 40 mm
two wall flanges are included in the package, one to be used with the ø32 outlet and one with the ø40 eccentric fitting
Product in conformity with EN 274 standards
Praktik bagno trap complies with the European standard EN 274
- water seal 50 mm
- water flow rate 41 l/min
Dimensional differences compared to basic versions
2322.241.6
Compared to basic version (Mosquito art. no. 2322.244.6)
2390.241.6
Compared to basic version (Chihuahua art. no. 2390.244.6)
Available range
| ARTICLE | FEATURES |
|---|---|
| 2322.241.6 | S trap, lower encumbrance from outlet pipe centre distance: 45 mm |
| 2390.241.6 | P trap, lower encumbrance from outlet pipe centre distance: 70 mm |